Absolute multi-turn encoders

Absolute multi-turn encoders
with solid shaft and hollow shaft

In addition to the angular steps per revolution, multi-turn encoders record multiple revolutions. An internal reduction gear is connected to the drive shaft, which records the number of revolutions. Alternatively, this can also be done electronically.

The measured value for multi-turn encoders is therefore made up of the angular position and the number of revolutions. The recorded measured value is also calculated and output via different interface modules depending on the interface. Available interfaces are: SSI, Canopen, CAN SAE J1939, RS485, Profibus, Profinet, Ethercat, Biss-C.

Multi-turn absolute encoder – solid shaft

Miniature standard industrial encoders
Series MS360

Size: Ø 36 mm
Resolution: 1 – 16 bit single-turn / 1 – 20 bit multi-turn
Solid shaft: Ø 6, 6.35, 8 mm
Coding: Binary, Gray
Interface: SSI, CANopen, SAE J1939, RS485
Supply voltage: 5 VDC, 8 – 30 VDC

Data sheet MS360_DEU
Data sheet MS360_ENG

Standard industrial synchro flange encoder
Series MS580

Size: Ø 58 mm
Resolution: 1 – 16 bit single-turn / 1 – 20 bit multi-turn
Solid shaft: Ø 6 – 12 mm
Coding: Binary, Gray
Interface:SSI, CANopen, SAE J1939, RS485, Profibus, Profinet, Ethercat, Biss-C
Supply voltage: 5 VDC, 10 – 30 VDC
Optional: Blind hole hollow shaft

Data sheet MS580_DEU
Data sheet MS580_ENG

Standard industrial synchro flange encoder
Series MS581

Size: Ø 58 mm
Resolution: 1 – 16 bit single-turn / 1 – 20 bit multi-turn
Solid shaft: Ø 6 – 12 mm
Coding: Binary, Gray
Interface: Parallel, SSI, CANopen, SAE J1939, RS485, Analog, Profibus, Profinet, Ethercat, Biss-C
Supply voltage: 5 VDC, 10 – 30 VDC
Optional: Blind hole hollow shaft

Data sheet MS581_DEU
Data sheet MS581_ENG

Standard industrial synchro flange encoder
Series MS700

Size: Ø 70 mm
Resolution: 1 – 16 bit single-turn / 1 – 20 bit multi-turn
Solid shaft: Ø 10 – 12 mm
Coding: Binary, Gray
Interface:SSI, CANopen, SAE J1939, RS485, Profibus, Profinet, Ethercat, Biss-C
Supply voltage: 5 VDC, 8 – 30 VDC

Data sheet MS700_DEU
Data sheet MS700_ENG

Standard industrial synchro flange encoder
Series MS900

Size: Ø 90 mm
Resolution: 1 – 16 bit single-turn / 1 – 20 bit multi-turn
Solid shaft: Ø 10 – 12 mm
Coding: Binary, Gray
Interface: Parallel, SSI, CANopen, SAE J1939, RS485, Analog, Profibus, Profinet, Ethercat, Biss-C
Supply voltage: 5 VDC, 8 – 30 VDC

Data sheet MS900_DEU
Data sheet MS900_ENG

Multi-turn absolute encoder – blind hole hollow shaft

Miniature blind hole version
Series MH360

Size: Ø 36 mm
Resolution: 1 – 16 bit single-turn / 1 – 20 bit multi-turn
Hollow shaft: Ø 6, Ø 6.35 mm
Coding: Binary, Gray
Interface: SSI, CANOpen, SAE J1939, RS485
Supply voltage: 5 VDC, 8 – 30 VDC

Data sheet MH360_DEU
Data sheet MH360_ENG

Miniature blind hole version
Series MH700

Size: Ø 70 mm
Resolution: 1 – 16 bit single-turn / 1 – 20 bit multi-turn
Hollow shaft: Ø 24 -36 mm
Coding: Binary, Gray
Interface: SSI, CANOpen, SAE J1939, RS485, Profinet, Profibus, Biss-C
Supply voltage: 5 VDC, 8 – 30 VDC

Data sheet MH700_DEU
Data sheet MH700_ENG